By admin /

INFORMATION FOR. INTERLINE Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. PRODUCT DESCRIPTION. A two pack epoxy holding primer. Protection for freshly blasted steel in tank coating products involving Interline g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council. Directive /13/EC). Interline Epoxy Tank Holding Primer.

Author: JoJonos Diramar
Country: Swaziland
Language: English (Spanish)
Genre: Music
Published (Last): 10 February 2017
Pages: 56
PDF File Size: 3.6 Mb
ePub File Size: 5.29 Mb
ISBN: 778-7-24988-503-7
Downloads: 33125
Price: Free* [*Free Regsitration Required]
Uploader: Gaktilar

Consult your International Paint representative for details. Clean all equipment immediately after use with International GTA Use International GTA only in exceptional circumstances.

DO NOT thin more than inteline by local environmental legislation. Consult your International Paint representative for specific recommendations. Application by roller is recommended for small areas only. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units.

Prior to use, obtain, consult and follow the Material Safety Data Sheet for this interliine concerning health and safety information.

The history and age of the steel and the method of working can have a significant effect on the paint consumption. The drying times and overcoating intervals may alter due to various on-site factors such as tank configuration and ventilation rates. Thoroughly flush all equipment with International GTA Do not exceed pot life limitations. Material is supplied in 2 containers as a unit.

Interline 982

Overcoating information is given for guidance only and is subject to regional variation depending upon local interrline and environmental conditions. Based on this, products supplied in different territories may not be approved to all of the standards listed above.


If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product.

Take precautions to avoid skin and eye contact ie. International Paint should be consulted to confirm that the tank coating is suitable for the range of cargoes to be carried.

As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances.

Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. Consult your International Paint representative for the system best suited for the surfaces to be protected.

Products Marine Coatings Marine chemicals Marine lubricants.

All surfaces to be coated should be clean, dry and free from contamination. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. Use in accordance with the standard Worldwide Marine Specifications. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.


It is good working practice to periodically flush out spray equipment during the course of the working day. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments.

Interline | Litnobiles

VOC values are typical and are provided for guidance purposes only. Actual safety measures are dependant on application methods and work environment. Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet.

Allows for more flexible working procedures whilst not detracting from the chemical resistance of the completed coating scheme.

Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe jnterline and to protect against toxic or oxygen deficient hazards. Always mix a complete unit in the proportions supplied. Petersburg, Russia, phone: Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays.

Recommended Tip Range 0. A two pack epoxy holding primer. Consult your local International Paint representative for specific recommendations.